The oil rig is driven by frequency conversion technology, enabling the drawworks to output maximum torque at zero speed and ensuring the hovering function of the hoisting system. It completely changes the traditional driller operation mode and realizes automatic drilling feed through frequency conversion and full digital control technology.
Mechanical rigs: high energy consumption, high noise, high carbon emissions, unfriendly to environment
Low system integration and low control accuracy
Narrow speed regulation range, shifting shock, low efficiency
Low reliability, high requirements for operators
INVT adopts frequency conversion technology compatible with green power grids to realize stepless and flexible speed regulation, expand speed range and improve operation efficiency. Torque control accuracy is enhanced via control algorithms; power balance algorithm improves master-slave load distribution; open/closed-loop hovering algorithm boosts operation reliability.
View Larger ImageReliable & efficient: strict quality control of core components + power unit redundant design
Precise control: triple-core integration, flux observer, high-speed torque response
Flexible configuration: modular power units, wide power range
Fault tracing: built-in fault black box and classification for quick location
Stepless speed regulation, field-weakening operation, higher efficiency, lower carbon emissions
Fast torque response, stable open/closed-loop hovering, precise torque control, improved drilling safety
Synchronous power balance, flexible switching between single and multiple units
Separate rectifier & inverter, stable voltage, high-efficiency output
GD880 Series Engineering VFD
4~6300kW
380V~690V
IP00 for units; IP20 for standard cabinets
IPE300 Series Engineering VFD
4~6300kW
380V~690V
IP20 for units; IP20 for standard cabinets
GD3000 Series Three-level Medium Voltage VFD
Input voltage: AC 3PH 970V–1310V (1140V)
Output frequency: 0–400Hz
Cooling method: Water cooling; heat pipe cooling
Low-voltage Oil-to-Electric Retrofit
Diesel engines are replaced by direct-drive motors, eliminating hydraulic couplings to maximize transmission efficiency. Two original diesel engines are retained as backup. GD800 engineering VFD supports master-slave control and power balance for even load distribution.
Energy Storage Workover Rig
The electric energy-storage workover rig uses battery energy storage to compensate for insufficient transformer capacity, realizing peak cutting and valley filling for drawworks power fluctuation. It solves the problem that low-voltage grid power cannot meet high-power hoisting demand. It facilitates intelligent automatic control with excellent energy-saving effect.
Beam Pumping Unit
Beam pumping unit, commonly known as “nodding donkey”, is the main lifting equipment in rod pumping systems. It converts motor rotation into reciprocating motion of the sucker rod via four-bar linkage to drive the downhole pump.
Electrical Submersible Pump (ESP)
Electrical Submersible Pump (ESP) is a rodless pumping device. The multi-stage centrifugal pump and motor are submerged below the well fluid level. The motor drives the pump to lift well fluid to the surface. It is mainly used in medium-to-high production low-viscosity oil wells.
Tower Pumping Unit
Tower pumping unit, also known as long-stroke pumping unit. It uses vertical tower structure instead of traditional beam, and wire rope & drum instead of four-bar linkage. It realizes direct vertical lifting and lowering of sucker rod, avoiding shortcomings such as short stroke, low efficiency and heavy weight.
Direct-Drive Progressing Cavity Pump
Direct-drive progressing cavity pump is a surface-driven system without gearbox or belt drive. The low-speed high-torque motor is directly connected to the polished rod. The VFD controls motor speed to directly drive the downhole pump. It is mainly used for heavy oil, high gas, sand and wax content wells.
Oil Transfer Pump
Oil and gas storage and transportation link the upstream and downstream industries of the energy sector. The safe and efficient transmission of energy is a key part of social development, along with economic growth and the transformation of the energy structure.INVT medium-voltage frequency converters are widely applied in oilfield sites and have won unanimous praise from users in applications such as natural gas compressors and large oil transportation pumps.
Natural Gas Compressor
Natural gas compressor is the “heart” of long-distance natural gas pipelines. It compresses and boosts natural gas to provide required pressure for pipeline transportation, and is key equipment for reliable pipeline operation.
Low-Voltage Hot Redundant VFD
Hot redundant frequency converter consists of one main control converter and two low-voltage converters of the same specification.In case of a fault in the active converter, the system can automatically and seamlessly switch to the standby converter within milliseconds, ensuring uninterrupted and continuous operation of critical loads such as compressors, pumps and fans.
Repair Progress Tracking | Identity Verification
To protect your repair information, please verify using the mobile number reserved on the service order.
Contact INVT
Get in touch with INVT. Our team will get back to you shortly.
