Item | Specifications | |
Input and output | Input voltage | AC 3PH 380V(-15%)~440V(10%) |
| Input frequency | 47～63Hz | |
| Output voltage (V) | 0–Input voltage (V) | |
| Output frequency (Hz) | 0–99Hz | |
Elevator basic features | Maximum floors | 15 floors |
| Maximum running speed | 1 m/s | |
| Communication mode | 1 sets of CANbus communication ports | |
Technical Performance | Control mode | VF(Commission mode), SVC(AM), FVC(SM) |
| Overload capability | 60s for 150% overcurrent； 10s for 180% overcurrent | |
| Starting torque response | PG vector control：0Hz/150% | |
| Speed control accuracy | PG vector control：±0.1% max speed | |
| Carrier frequency | 2.0kHz～10.0kHz | |
Peripheral interface | Low-voltage digital input terminals | 25 low-voltage digital input channels, DC24V / 4.5–8mA. High-level input active, maximum frequency 1kHz, internal impedance: 3.3kΩ |
| Analog input | 1 way (AI1) 0~10V/0~20mA input selectable, resolution 20mV | |
| Digital input/output | 20 ways of button input/output: L1~L20 | |
| High voltage detection input | 3 ways 110V input: DC1~DC3, COM: DC- 60~120VAC | |
| Relay output | 25 ways digital output: Y0~Y24, DC30V/5A, AC250V/5A Among them, Y0 can be used as an emergency operation output, and Y2 can be used as a brake output. | |
| CAN communication ports | 1 way CAN communication ports | |
| Encoder interfaces | Built-in encoder interfaces supporting sine-cosine, open-collector NPN output, and push-pull output. Expandable support for Sin/Cos, incremental, EnDat encoders | |
Features | Operation mode | Normal run, inspection, fire mode, earthquake mode, re-leveling, door-open re-leveling, UPS operation |
| Stopping method | Multi-step speed crawling stopping | |
| Starting torque compensation | Two independent regulation methods using the speed loop and position loop, enabling smooth start without a load weighing device. | |
| Motor auto-tuning | Synchronous and asynchronous motors use static auto-tuning | |
| Automatic voltage regulation | Maintains constant output voltage automatically when grid voltage fluctuates | |
| Low voltage slow down | In installation mode, when the system detects a low input voltage level, it automatically reduces the operating speed. | |
Operating and monitoring | Integrated controller keypad | Composed of a 5-digit LED display, 8 indicator LEDs, and 5 keys. It supports parameter searching, parameter setting, etc. |
| Handheld operator | Supports parameter setting, parameter upload and download, soft fault inquiry, and manual call operations | |
Popular Searches:
EC90B Elevator Intelligent Integrated Controller
EC90B elevator intelligent integrated controller is a high-performance integrated control system designed for modern traction elevators, combining drive control, elevator logic control, and system management in a compact architecture. It features advanced vector control, flexible parameter configuration, and comprehensive protection functions to ensure stable and reliable operation. The EC90B is widely used in passenger elevators for residential and commercial buildings, offering efficient commissioning, smooth ride comfort, and adaptable system integration for diverse installation environments.
·4-5.5kW
·
0-400V
·
Maximum 15 floors
ImagesOverview
Features
Specifications
Downloads
More Resources
Case
Videos
More
Features
Safe and reliable
Multiple protection mechanisms including
electrical protection, operational monitoring, and fault diagnosis ensure safe elevator operation. Built-in protection parameter groups support system monitoring, detection functions, and operational status tracking. Supports forced deceleration switch monitoring, terminal protection, and leveling control for safe movement management. Complete fault code system and diagnostic functions enable fast troubleshooting and maintenance.Integrated brake control logic and operation sequence management enhance operational safety and reliability. 01
Ease of use and convenient commissioning
Integrated drive and control
design simplifies wiring and system installation. Built-in keypad and digital display for parameter setting, monitoring, and commissioning. Structured parameter groups covering motor control, speed curves, communication, floor configuration, and elevator logic enable intuitive configuration. Supports motor auto-tuning and commissioning procedures for both inspection and normal operation modes. Provides step-by-step slow-speed and high-speed commissioning guidance to simplify field debugging. 02
Intelligent high performance
Advanced vector control with dedicated
elevator motion control logic for smooth acceleration, deceleration, and leveling. Flexible speed curve configuration including S-curve adjustment and ride comfort optimization. Load compensation and adaptive control functions improve starting performance and ride smoothness. Supports synchronous and asynchronous motor control with encoder feedback configuration. CAN communication and serial communication support for system networking and distributed control. 03
Rich system functions and application flexibility
Complete elevator logic functions including
driver mode, fire operation, elevator locking, and overload management. Floor configuration, leveling micro-adjustment, and door operation parameter control for precise system behavior. Supports expansion boards and peripheral device integration such as floor display, hall call boards, and hoistway switches. Compatible with energy regeneration units and various external system components. Designed for diverse installation environments with flexible hardware configuration and system layout.04
Specifications
Downloads
By Type:
Load More
Have questions or need support?
Our professional team is here to help.
Inquiry
TOP
Popular Searches:
Repair Progress Tracking | Identity Verification
To protect your repair information, please verify using the mobile number reserved on the service order.
Verify with the reserved mobile number
Verify
SMS Verification Code *
If you cannot receive the code, please contact the after-sales hotline. 400-700-9997
Contact INVT
Get in touch with INVT. Our team will get back to you shortly.
Full Name *
Company Name *
Email Address *
Phone Number *
Country *
City
Inquiry Type *
Product Category *
Select the product you're interested in.
-
Industrial Automation
-
Network Power
-
PV & ESS
-
e-Mobility
Your Message / Requirements *
I have read and agree to INVT Privacy Policy and Terms of Use
Captcha *
