Cold Rolling Mill Solution
INVT GD880 solves pain points such as precise control of multi-roll mills, achieving stable and efficient operation, cost reduction and quality improvement, ensuring reliable operation of cold rolling production lines.
Popular Searches:
Industry Challenges
01
High difficulty in tension control: Precise control of sheet tension is required, and the drive system must deliver high control accuracy. Otherwise, sheet deviation and scratching are likely to occur, affecting product quality.
02
High coordination requirements: The drive systems of the entire production line must operate synchronously; coordination imbalance may easily arise and impair production continuity.
03
Poor spare parts universality and high O&M costs: VFD spare parts for different roller systems have inconsistent specifications, causing difficulties in stocking and inconvenient replacement, which increases maintenance time and costs.
04
High pressure in operation, maintenance and emergency repair: The production line runs continuously under high load, with slow fault location and complex replacement, resulting in huge losses from downtime.
05
Prominent safety risks: In high-speed cold rolling scenarios, safety functions must be strictly guaranteed to prevent production accidents caused by equipment out-of-control.
06
Difficulty in renovation: Risks arise from system compatibility issues during the renovation of old equipment and brand replacement.
INVT Solution
Cold Rolling Mill Solution
With INVT GD880 high-performance industrial drive as the core, the solution focuses on key pain points in precise control, coordinated operation and convenient maintenance for multi-roll mills in sheet cold rolling.Relying on modular design and advanced control algorithms, it achieves stable, efficient, low-consumption and highly reliable operation of the production line, supporting domestic substitution, cost reduction and efficiency improvement.
View Larger ImageSolution Highlights
Precise Control: Adopts a DSP+FPGA+ARM triple-chip architecture, achieving speed stability accuracy of ±0.01%, torque accuracy of ±3%, and torque response time of <5 ms. It suppresses tension fluctuations in real time to ensure precision.
Hassle-Free Integration: Features a multi-drive modular design with an AFE rectifier + inverter common DC bus multi-drive architecture. Spare parts are highly interchangeable, and a single module can be replaced within 30 minutes.
Fault Tracing: Built-in fault black box function supports cyclic recording of 10 channels and 100 sets of fault waveforms, eliminating the need for fault reproduction.
Drive Redundancy Design: Supports dual-channel communication redundancy and power unit redundancy configuration.
Safety Functions: Integrates the STO (Safe Torque Off) function to establish a higher-level safety architecture.
Flexible Control: Built-in free function blocks, seamlessly compatible with various host system protocols and data processing.
Customer Benefits
01Improve Production Efficiency
Adopting a triple-core coordinated architecture with high-speed loop calculation and ultra-high precision standards, it eliminates issues such as profile distortion and strip breakage, ensures sheet processing accuracy, and increases product yield.
02Modular Operation & Maintenance
Universal spare parts for the entire production line with independent and quick replacement of units; improves fault tolerance, shortens maintenance time, and reduces spare parts inventory cost.
03Rapid Production Recovery
Accurate traceability with 100 sets of fault waveforms; fault location time reduced from 2 hours to 15 minutes, with quick module replacement for faster production recovery.
04Safety Assurance
Provides a higher level of safety protection, eliminating equipment runaway and personal safety risks in high-speed rolling scenarios.
05Risk-Free Retrofit of Old Equipment
Perfectly compatible with the production line host and existing systems without modifying PLC programs, shortening the retrofit cycle by 60%.
Industry Solutions
-
Alumina Production Line Low-Voltage Drive Solution
With high-efficiency variable frequency technology, INVT achieves system-wide energy saving, stable process control, long equipment service life, safe power supply and intelligent operation & maintenance.It provides core electrical solutions to reduce costs, stabilize production and improve efficiency for alumina production lines.
Learn More -
Copper smelting Line Low-Voltage Drive Solution
INVT takes the IPE300 as the core, adapting to the full-process low-voltage loads of copper smelting, achieving reliable operation in harsh environments and precise process control, ensuring continuous and efficient production lines.
Learn More -
Copper Smelting SO₂ Fan Medium-Voltage Drive Solution
INVT's Medium-voltage VFD solution for SO₂ fans is tailored to the operating conditions of SO₂ fans in copper smelting. It features anti-corrosion, anti-shock performance and precise speed regulation, ensuring stable operation, environmental compliance, cost reduction and efficiency improvement.
Learn More -
Mining Hoist Drive Solution
INVT’s four-quadrant hoist solution integrates customized design, extreme energy saving, precise control, operating condition adaptation and full-life-cycle service.It delivers comprehensive value for mining and mineral processing hoisting equipment: enhanced safety, reduced energy consumption, upgraded efficiency and simplified operation & maintenance, helping mining enterprises lower costs, boost efficiency and achieve green transformation.
Learn More -
Mining Belt Conveyor Drive Solution
INVT’s variable frequency solution for mining belt conveyors adapts to heavy-duty and harsh working conditions through adaptive intelligent control.Master-slave coordination and heavy-duty starting technologies ensure stable operation of belt conveyors. Combined with intelligent operation and maintenance, it helps customers achieve stable and energy-saving equipment performance, safety and reliability, as well as cost reduction and efficiency improvement.
Learn More -
Mining Flotation Solution
INVT’s flotation and mineral processing solution delivers stable and reliable production, higher concentrate recovery rate, lower overall cost, and hassle-free operation and maintenance experience for customers.
Learn More -
Ironmaking Process Solution
INVT’s variable frequency drive solution for ironmaking processes focuses on strong environmental resistance, heavy-load adaptability, high efficiency & energy saving, and power grid self-healing, creating a highly reliable drive system for the entire ironmaking process.
Learn More -
Steelmaking Process Solution
INVT’s variable frequency drive solution for steelmaking processes features high reliability, strong anti-interference capability, precise control, stable continuity, easy operation and maintenance, and comprehensive safety as its core advantages.It adapts to extreme steelmaking working conditions, solves pain points in production and operation, and ensures continuous and efficient operation throughout the entire steelmaking process, as well as cost reduction and efficiency improvement.
Learn More -
Hot Rolling Mill solution
INVT's drive solution for bar and wire rod hot rolling production lines achieves full-link synchronization, micro-tension and high-performance control, adapting to the harsh working conditions of rolling lines and enabling efficient production.
Learn More
Have questions or need support?
Our professional team is here to help.
Inquiry
TOP
Popular Searches:
Repair Progress Tracking | Identity Verification
To protect your repair information, please verify using the mobile number reserved on the service order.
Verify with the reserved mobile number
Verify
SMS Verification Code *
If you cannot receive the code, please contact the after-sales hotline. 400-700-9997
Contact INVT
Get in touch with INVT. Our team will get back to you shortly.
Full Name *
Company Name *
Email Address *
Phone Number *
Country *
City
Inquiry Type *
Product Category *
Select the product you're interested in.
-
Industrial Automation
-
Network Power
-
PV & ESS
-
e-Mobility
Your Message / Requirements *
I have read and agree to INVT Privacy Policy and Terms of Use
Captcha *
