INVT GD5000 Series MVD Drives for Contra-Rotating Mine Ventilation Fans in Vietnam
Abstract: In mining industry, the contra-rotating fans are core equipment in ventilation systems, and their application requirements and challenges are very unique. INVT GD5000 series MVD is a key solution to these problems.
Keywords: Mining, Contra-rotating fans, GD5000 MVD
I. Project background
The contra-rotating fans are widely used in mining to provide high-efficiency ventilation and gas extraction, delivering high airflow and pressure in compact spaces while ensuring energy efficiency and operational safety.
The project is located in a mining plant in Vietnam. It is an old equipment renovation project. The old system has many disadvantages.
Enormous Energy Waste:
Traditional systems use dampers, hydraulic couplings, or fixed-speed drives. When reduced airflow is needed, it's achieved by "throttling" (closing the damper), but the motor still runs at full speed, resulting in 30%-50% of electrical energy being wasted on damper resistance.
Crude Control and Lagging Regulation:
Mechanical adjustment methods have slow response times (minutes) and low accuracy, making it impossible to achieve on-demand ventilation. The system often operates in an "oversized motor driving a small load" state and struggles to cope with the dynamic changes in the mine ventilation network.
Starting Shock and Mechanical Wear:
During direct starting, the huge starting current (6-8 times the rated current) shocks the power grid, while the powerful mechanical shock torque (more than 1.8 times) accelerates fatigue damage to gears, bearings, and impellers.
Dual-Motor Synchronization and Power Balancing Challenges:
The two stages of an axial fan are usually driven by two motors. With traditional drives, it's difficult to precisely control the speed, torque, and power distribution of the two motors, potentially leading to uneven load distribution between the two stages, reducing overall efficiency, and even damaging the equipment.
II. Customer requirements
Since the contra-rotating fans are core equipment in ventilation systems, customer has the below demand:
Main Ventilation System Requirements: As the "lungs" of the entire mine, the main ventilation system must operate reliably 24/7, providing a constant and sufficient supply of fresh air (often hundreds of cubic meters per second) to dilute and remove harmful substances such as methane, dust, and diesel exhaust.
Energy Saving and Cost Control: The main ventilation fan is the largest consumer of electricity in the mine, accounting for 20%-35% of the total electricity consumption. Any improvement in efficiency can lead to significant operational cost savings.
Operating Condition Adaptation and Airflow Regulation: Mine ventilation requirements are not constant. As mining faces advance, tunnels are connected, and production changes, the total airflow needs to be dynamically and precisely adjusted (the adjustment range is typically between 60% and 105% of the rated airflow).
Safety Redundancy and Rapid Response: The system must have the capability for rapid switching or reverse ventilation in case of failures or disasters (such as fires or methane outbursts) to change the airflow direction and control the situation.
III. INVT Solution
According to the site condition and customer demand, the solution configurations are as below:
| Motor parameters | |
|---|---|
| Motor type | Asynchronous squirrel cage motor |
| Rated power | 2*500 kW |
| Rated voltage | 6kV |
| Quantity | 2 |
| Rated current | 60A |
| RPM | 993 |
| MVD parameters | |
| Model | GD5000-A1400-06-L(F) |
| Rated capacity | 1400kVA |
| Rated power | 1120kW |
| Rated voltage | 6kV |
| Rated current | 135A |
| Quantity | 2 |
And the system schematic diagram is as below:

Solution features
2 nos MVD in one group, 2 groups, one in running, the other backup
2 nos MVD in Master-slave control
Integrated machine, compact structure, easy to install
No need output filters, meet the requirements of long cables.
Support Vietnamese language
Site photos:
The 4 nos of MVD are installed in the same machine room and built airduct to extracting hot air.

Front side photo(air duct at the top)

The fan set
IV. Customer benefits
Excellent Energy Saving Performance: The main ventilation fan achieves significant power savings, with a return on investment usually within 1-3 years.
Precise Intelligent Control
Stepless speed regulation, constant airflow/constant pressure control, achieving "ventilation on demand".
Master-slave control mode ensures balanced power and synchronous operation of the two-stage motors, optimizing fan performance.
Comprehensive Equipment Protection
Soft start and soft stop: Starting current < 1.5 times the rated current, completely eliminating mechanical shock and extending equipment life.
Surge protection: Built-in anti-surge control algorithm, automatically avoiding dangerous operating conditions to ensure safe operation.
Intelligent monitoring, real-time monitoring of motor torque, temperature, etc., enabling predictive maintenance.
Enhanced Safety and Reliability
Grid-friendly: High power factor (>0.95), reducing harmonic distortion (using multi-level technology).
Redundant design: Can be combined with a mains bypass system for redundancy, improving system availability.
V. Conclusion
The application of INVT GD5000 series MVD to contra-rotating fans in mines goes far beyond mere "energy saving"; it represents an intelligent revolution in ventilation systems. By transforming fixed, inefficient ventilation patterns into flexible, precise, and predictable intelligent air supply modes, it not only addresses the core problem of high energy consumption but also brings about comprehensive upgrades in equipment safety, system reliability, emergency response, and intelligent management. It is a crucial element in building safe, green, efficient, and intelligent mines.



Repair Progress Tracking | Identity Verification
To protect your repair information, please verify using the mobile number reserved on the service order.

Contact INVT
Get in touch with INVT. Our team will get back to you shortly.
-
Industrial Automation
-
Network Power
-
PV & ESS
-
e-Mobility







