Support

Support

FAQs Library
Q
How does the GD5000's dual-frequency braking function work?
2022-08-24
A

In the deceleration process of GD5000 VFD, 300Hz high frequency voltage is superimposed on the base frequency 0-50Hz, increase motor stator loss, so as to achieve the purpose of fast braking.


00.png


Q
Does the INVT medium voltage VFD (MVD) support the Internet of Things platform?
2022-08-24
A

Yes. INVT MVD has itself Internet of Things platform .Support INVT standard design or customized requirements.

Q
What is the impulse current to the power grid when starting the motor with MVD?
2022-08-24
A

Due to MVD is the stepless speed regulating device,the acceleration time is from 0-3600s,so the impusle current is the same as the motor rated current.

Q
Can the power cells in the INVT medium voltage VFD (MVD) be used interchangeably?
2022-08-24
A

Yes. INVT MVD power cells can replace use. In the MVD all power cells are the same include hardware and software, so it can replace by each other.

Q
How about the room size for MVD?
2022-08-24
A

Please check right pictures for reference.

520.png521.png

Q
During operation of the INVT medium Voltage VFD , if HMI fails or crashes, whether the converter can operate normally?
2022-08-24
A

Yes, the MVD will continue running when HMI fails or crashes. Because the running command and sate are recorded in MVD control board, HMI only show the data, if HMI is fault or crashes, MVD can continue run. At this time we don't know detail date from the control board.

Q
Generally, the VFD supports 4-20mA analog. Why does the INVT medium Voltage VFD support 0-20mA analog ?
2022-08-24
A

Because INVT MVD support voltage (0-10V) and current (0-20mA) two type analog sources. Those two analog sources share one circuit, that is 0V=0mA and 10V=20mA, so INVT MVD current analog range is 0-20mA.

Q
What is the maximum distance between the motor and the MVD cable supported by the MVD without output reactor?
2022-08-24
A

The maximum distance between the motor and the MVD cable 2km without ouput reactor;
If MVD with output reactor or sine-wave filter can support maximum 5km.

Q
How to configure edium voltage VFD (MVD) indoor air conditioning ?(Not include cooling windows and doors)
2022-08-24
A

Firstly calculate the MVD poss loss;
Secondly 1HP can cooling 2.5kw power. 1HP=12000btu; 1btu=0.252kcal;
Finally can calculate the air conditioning power. Above data is rough design of reference data, the actual data please contact with INVT technical support engineer.

89101112 Show:
You can also view:
Service IntroductionValue added ServiceTraining DownloadFAQsProduct Query

Product Inquiry
Name:*
Company:
Country:*
E-mail Address:*
Phone:
Content:*

Our site uses cookies to provide you with a better onsite experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Cookie Policy.